Home > Hard Drive > Hard Drive Shows Up In Bios But Not Windows 10

Hard Drive Shows Up In Bios But Not Windows 10


I tried to reinstall windows but the hard drive was not detected. So.. Happened after my computer froze and now the system now takes a longer than usual pause between windows load screen and the welcome screen. Loading... Source

This is exactly what I needed to do. To the right will be one or more large sub-blocks representing Partitions already defined. switches on and switches off after a few seconds. checked under device manager not found, checked through Acronis Cloning Softwear, not found. http://windowssecrets.com/forums/showthread.php/146352-Blue-Screen-after-installing-second-HD

Hard Drive Shows Up In Bios But Not Windows 10

Alos, Mar 14, 2017 at 4:09 PM, in forum: Hardware Replies: 6 Views: 130 Alos Mar 16, 2017 at 3:52 PM Thread Status: Not open for further replies. I tried switching cables but the computer boots only if I remove the second HDD. It did not see it, either. I physically installed it inside the second HDD tray (making sure to ground myself and unplug the power cable).

I'm not sure what else I can do. The drives were visible in my raid control software and in the safely remove hardware icon in the tray, but still not in disk management. The BIOS will see it and, with the matching SATA port mode set and driver installed (needed if not IDE Emulation), Windows will be aware it exists as a piece of Hard Drive Detected In Bios But Not During Windows 7 Installation A Full Format will do a Quick Format, then go though every sector of the drive and test it, marking off any faulty ones (very rare) so they won't be used.

Go to the place where your various hard drives are displayed - often the first set of screens. PaperdocFeb 2, 2010, 1:37 AM Deca, let's see if we can help. So at that point windows was NOT having a major problem. If you are using eSATA, is it an eSATA port the was built into your mobo, or are you using an adapter plate on the back that plugs into one of

IDE (or PATA) Emulation has the mobo make the actual SATA port appear to Windows to be just a plain IDE drive that it already understands, and it all works with Hard Drive Shows Up In Bios But Not Disk Management Windows 10 Next time the backup froze, I tried shutting down. All Sata3. andyscreationsJun 14, 2014, 8:14 PM I had the same problem and found the SOLUTION....

Install/diagnostic/repair Software From Seagate

I just added a second SATA hard drive, a 500GB Seagate (ST3500631NS). Am getting really p****d off with Microsoft products.Can anyone proffer a solution? Hard Drive Shows Up In Bios But Not Windows 10 You may have loosened a cable when you installed the new drive.Shut down the PC, unplug the power, and open the case. Second Hard Drive Not Showing Up In Disk Management Note that this applies to ALL version of Windows.

Get the answer g-pawDec 20, 2007, 7:01 AM The software is designed specifically to identify and address hdd problems. http://roguewb.com/hard-drive/how-to-install-a-second-hard-drive.html AnonymousSep 7, 2009, 3:31 PM I am user, not an expert, but i decided to install my own second drive (Hitachi 500 gb) in my Dell Dimension 9200 running Vista Home Your new disk should be here with no letter name and no info. If you did change a setting, remember to use the right key to Save and Exit.3. Windows 10 Not Detecting Second Hard Drive

  1. If you are unable to obtain an updated BIOS or the last BIOS supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode set
  2. I couldn't get the computer to recognize it.
  3. You need to use Windows Disk Management to do two jobs: Partition and Format that new unit.
  4. Yes No Thanks for your feedback.Don't forget to take a few seconds to say thanks: Thank you Thanks for your feedback.We're sorry.
  5. Choose the NTFS File System option.
  6. If the troublesome HDD is not showing up here, it has a major hardware problem because the BIOS cannot communicate with it at all.

This second hard drive gets detected in the bios and even gets detected by SpinRite 6.0 when I boot up. and i looked every were on line to find info, no luck till i read ur post..... not sure where to go.. have a peek here What are the tax implications if I do some work for a company for trade, rather than pay?

Flashing my bios to the latest version made me notice something about the way the raid controller was handling my drives. Hard Drive Shows Up In Bios But Not Windows 8 ScottDaManNov 6, 2009, 11:53 AM Hey guys. It worked for me.

then rescan in disk management, that did it for me.

Full Format takes many hours!When you are done, exit out of Disk Management, reboot and your newly prepared hard drive should show up in My Computer as an empty unit ready Now, examine the TWO right-hand panes. if u do try win7 and vista disc and see if it show the hdd at the install process part kevin85219Nov 2, 2009, 6:30 AM I have a Hitachi Deskstar 500GB Installing Second Sata Hard Drive Without Raid I will test with another seagate disk when i have the money.

But at least this improvement removes a defective HDD off the list of possible culprits.Two things I still don't understand:1) I'm adding the information about the power supply as requested at If there is some space not yet assigned to a Partition, it will be a block further to the right called "Unallocated Space". This is probably good advice. Check This Out Choose the NTFS File System option.

On most machines, when you turn it on you hold down a key, usually the "Del" key, and wait for a few parts of the POST displays to pass by until Any suggestions? I'm planning to use it for Data Storage as one full disk. Disconnecting the original source disk I can run XP on the new disc, YET it is still not recognised by Windows device manager.

did you get anywhere with this - i am having the same issue. get that external casing for a 3.5" HDD. No i haven't, my pc is kinda cluttered(im bad at cable management lol) so i just used the power/data cable from my dvd drive. Press F2 when booting up the computer 2.

But it may also have a File System showing as RAW, which means that some of its structure data has been corrupted and it is not recognized.