Home > Windows 98 > Canon Laser Shot Lbp 1210

Canon Laser Shot Lbp 1210


Everything was working fine then all of a sudden I received errors "No printer installed." There is no printer showing to uninstall.

I've tried to add my Lexmark printer using the "Add Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 In the window that opens, scroll down to Remote Procedure Call (RPC), and Remote Procedure Call (RPC) Locator are not disabled. Is taking the printer apart the only way? (is that even safe/good to do on my own part?) Please help thank you very much.

My printer is MF4350d. Open the printer cover and remove the cartridge and check carefully if there is any small piece of paper which is stuck inside, if so carefully remove it. 8. I have XP Home Edition Version 2002 SP2... (I tried this file WindowsXP-KB884020-x86-enu.exe(Loopback file), but it is not working) Thank u.... NOTHING I can think to do gets me beyond this point.btw:*Yes, ink cartridges correctly inserted, moved back in correct position; unit completely closed. https://forums.techguy.org/threads/windows-98-message-add-paper-to-printer.34992/

Canon Laser Shot Lbp 1210

When the printer's operation is completed, follow the confirmation message to load three new sheets of A4 or letter-sized plain paper in the auto sheet feeder 7. The services that normally run in the background responsible for printing seem to be haywire, though.

One dialogue says that the "print spooler service" is not running. So what the hell is going on?I am in the process of obtaining the newest driver files and contacting Lexmark.com and will await their response as well.

  1. I didn't that (all of them inside/outside) before posting.
  2. I cannot think of anything that I did recently to cause this kind of problem.
  3. What can I do?

It did happen previously and I used some compressed air to clean the printer and everything worked fine. I'm running Windows 7 Ultimate 64-bit. That blue roller works as a grip, it feeds one sheet of paper to the main roller, which then passes it to other rollers, coronas, transfers, and such. Re-installing drivers doesn't help.

sometimes makes clicking sound. Paper Bits Shot From A Cannon Crossword Another reason I'm hesitant to make any move towards better paper is that it seems that the higher quality paper is designed to ... It makes a weird "clicking" sound whenever I turn it on, and then when I try to feed it paper, the sheets either get stuck and become crooked and cumpled. http://www.fixya.com/support/t14327472-printer_makes_clicking_sound_when_trying The network seems to be okay, since we can access each other's shared files, and both of us can get on the internet.

More replies Relevance 52.48% Question: Epson Printer wont print all the time with thick paper Just updated the drivers on my Epson Artisan 700. but on a previous PC and with HP drivers.

Now whenever I print the job of say three pages the first one or two pages (or the top of a single page) Or can I?--In properties I can go to user defined size, no way I can see to define it. Now I have reached the point where a printed page is the exception and a paper jam is the norm.

Paper Bits Shot From A Cannon Crossword

Havent done anything significant, have tried re-installing the drivers and its still not there!HEEEEELLLLLLPPPPPP!!!!!!!!!!! read this article I updated the drivers with no improvement. Canon Laser Shot Lbp 1210 If not, please read here. 1 more replies Relevance 101.27% Question: Sony Printer installs as "generic printer" - can i stop the add hardware wizard? As best can determine, it appears the rollers are not feeding the paper, and no paper is jammed as far can see inside the machine, but see no way to really

After printing about 10 times last night, I got only 2 that came out with anything. Has anybody ever encountered this? There seem to be all sorts to choose from, which is making this relatively simple task seem a lot more daunting than it should be.I don't need it to print out If you check the Device Manager, the printer is listed in the "Other Devices" category, but shows no conflicts and the status of it says that the device is working properly.


I thought that someone in this catagory might have encountered this problem as well. My dell 926 AIO printer stopped doing everything and continues to give me the message "printer busy" The LCD lights on the operating panel stopped working but I can hear the If I cannot figure out what is going on, I'll simply format and begin again. The problem is my associate has a Lexmark Z12 printer and Win ME / Windows Me computer.

Does any one have ideas about what to do except to trash the printer. I have checked all settings and speeds, nothing wrong there. I believe there is a photocell somewhere in the printer, which is supposed to sense the paper.

It just can't communicate with the printer.

Here finally, is my problem. Try to rotate the wheel inside the feeder if you can reach it, to ensue that it is free enough to pull the paper. 10. Secondly, the printer says there is a paper type/size mismatch. When trying to print a test page it comes through blank.Any helpful solutions will be much appreciated.Thank You More replies Relevance 102.91% Question: Windows 7: Disabling printer sound "Now Printing" and

Buy the Full Version More From This UserSkip carouselAssociation RuleNS 3Offline Application FormGuitar Chords Sign up to vote on this titleUsefulNot usefulLaser Shot Lbp1210 Service Manual by Pradeep Keshwani0.0 (0)EmbedDownloadRead on If something is stuck under the black guide plate, this may work it loose. If you're not already familiar with forums, watch our Welcome Guide to get started. Mar 16, 2017 | Lexmark X2470 All-In-One InkJet Printer 0 Answers How do I reload laser toner cartridge to my lexmart E233 printer Mar 16, 2017 | Lexmark Office Equipment &

It went all down hill from there. I'm really inexperienced in this department, and I really have no idea what I need to buy. But "Managed Printer" not clicked. Confirm the message, and click 'OK'.Note: Clicking 'OK' will activate the paper feed rollers 30 times.

Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.) 3. Is there any way to clear this erroneous message and get the printer working again? Jul 21, 2009 | Office Equipment & Supplies 1 Answer Keeps saying no paper Makes loud clicking noise The clicking sounds seems to be made by the small gears on the I have 2 different printers.

Disconnect from your PC, removed form Control Panel or Printers and Faxs. 1 more replies Relevance 102.09% Question: "Enable birectional support" message on network printer I have a Dell desktop running System Restore - How to If this is not an option, let us know.Good luck and post your results. 7 more replies Relevance 80.04% Question: Printers "Operation could not be completed I have checked the rollers and cleaned them to no avail. the printer started kicking out a blank page between printed pages every so often, then it started kicking out 2 blank pages and stooping with the maintenance light on.

Remove the paper tray On the right side of the copier where you feed the single sheet, you pull down the door. No virus was found. The issue is resolved by restarting the print spooler (or logging out and back in or rebooting or re-installing the printer) sois only an issue during the users first login. ... I used to go wireless from the computer to the router, ethernet from the router to another computer and USB from that computer to the printer - everything worked.

I printer the first page (from the tray) of a 4 page document. There are no more endpoints available from the endpoint mapper. [OK] Hello i Have the above problem while I try to share a printer on a domain network.