Home > Windows Me > Windows ME Fails To Accept Driver From Floppy

Windows ME Fails To Accept Driver From Floppy

Not connected properly Power down, unplug, and open computer, being aware of ESD and its potential dangers. I did have the disc at some point around the house but unfortunately we cleaned up around the house and the disc somehow went missing. It is a substitute to traditional floppy drive, with the exception that it exists as a file rather than a physical media that conventional floppy drives have been. Any thoughts?

The only problem is that it is literally impossible to find drivers for this motherboard. The only reason that it says 720KB is because I changed it in the BIOS from a bigger number I think. Short URL to this thread: https://techguy.org/47416 Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? If you are unable to boot from the XP/2000 CD, then please check the last step in this short guide.

Nice work Rick, well done. Please read the entire post & the comments first, create a System Restore Point before making any changes to your system & be careful about any 3rd-party offers while installing freeware. TechSpot is a registered trademark. So have them ready.

  1. At the Welcome to Setup screen, press R to start the Recovery Console.
  2. Could the absence of such a resistor be the source of my problem?
  3. Cover the hole on the right with some black tape and XP will see this as a 720KB disk and format it.
  4. For example when I download the other drivers could I download USB 2.0 drivers, PCI WiFi card drivers and 3dfx graphics card drivers? 2 Under network adapters it say somthing like
  5. Press the number key that corresponds to the installation that you want to repair, and then press ENTER.
  6. Join our site today to ask your question.

What I did next was boot to Mac internet recovery and followed the steps and once it came time for me to choose the hard drive I wanna install osx on, You must install Service Pack 1 to fix this problem. I don't think that the problem is from the ISO as I've tried using the same ISO I've used in all the previous times I've successfully installed Windows 7 on my Whether you get a blue screen or XP/2000 just hangs, then this information is for you.

All Rights Reserved. Wish me luck. svolFeb 4, 2003, 10:33 PM That setting checks if your FD uses 40 or 80 cilinders or something... check this link right here now The drivers for the IDE controler will not work if changing from say a VIA chip set to Nvidia or SIS etc.

If you are unsure whether you have RAID/SCSI, then simply let the CD load without pressing F6. Help me please. If it appears to be connected, disconnect, and then reconnect cable to verify cable is seated properly. I run the Internet Connection Wizrd and try to install a new connection.

This tool can be used to create floppy disk images from the files present on your PC. http://www.tomshardware.com/forum/44749-28-windows-recognize-floppy-drive This can often be due to hardware failure (bad hard disk, memory or CPU for example). How do I allow the dial up modem selection to be chosen when it won't let me?Click to expand... You need to do that or you'll see weird things where it may appear or disappear.There are no stupid questions, only stupid people doling out faulty information based upon rumors,

I also have no USB and internet access on my PC so basically the only way for me to install the drivers are- 1 Search the house for the motherboard disc. If covering the hole does not work you can force XP to format the disk to 720kb. Also my Floppy is good because it works on XP like that and also it does the same thing to my orange Floppy which does indeed have the plastic on top. Join the community here.

Already have an account? Well you can use your physical Floppy Disk Drive or you could use a Virtual Floppy Drive. But there may be some users who may need to use the Floppy Disk for some reason. It works in the same way as a CD, DVD or ISO image file.

Other brands may have different keys to press to enter setup, but F1, F2, Del, Tab and CTRL+S or CTRL + ALT + S are the most common ones I'm familiar Create a Virtual Floppy Disk on Windows 10 No desktop computer or laptop comes today with a physical Floppy Drive, but there are several free tools that can help you create a virtual would this work (fixing windows instead of reinstalling) or do i just bite the bullet and redo it .

System repair will only repair your software.

Dec 26, 2016 12:32 PM Helpful (0) Reply options Link to this post by Loner T, Loner T Dec 26, 2016 12:48 PM in response to SuicideJesus666 Level 7 (29,242 points) If the disk is not write protected try another floppy disk. For USB 2.0 on Windows 98 you can download the generic drivers here. If connected, disconnect, and then connect the floppy drive cable to verify seated properly.

much thanks. Register now! This tool also allows you to format and launch a program on a virtual floppy. 2] ImDisk Virtual Disk Driver ImDisk Virtual Disk Driver allows you to reserve a part of Ask !

Like I said before after you get it up and save all your inportant stuff do a clean install. Install the OS disc and boot from it than run through as if you are doing an install. solved New Hard Drive not ready for use. MeredithClick to expand...

Replace the floppy if the floppy data cable did not resolve your issues. procedure entry point GetIUMS could not be located in the dynamic link library MSDART.DLL" i restarted my comp and windows tried to install again and the same error came up. To enter your BIOS, most users here will press the DEL key. Windows MCE 2005 does not recognize DVD drive solved BIOS recognizes boot drive but windows does not boot Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland

If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Why would you need to use a Floppy on Windows 10 You might wonder about why we need to use a floppy disk in the first place. Ask a Question See Latest Posts TechSpot is dedicated to computer enthusiasts and power users. Loading...

If you do not have any yellow exclamation marks on a device, you do not need to update the driver. it was installing pretty quickly when an error came up. How to use Floppy Disk Drive on Windows 10 If you have an old physical Floppy Drive that you can attach to your device, then you will need to download the In these cases, the system repair function will not work.

Here are some of them that you can use. 1] Simplified Virtual Floppy Drive (VFD) Simplified Virtual Floppy Drive mounts image files (. So I found the CD with the file and went on easily. much thanks. solved Just installed msata hard drive and fresh windows 7 install; laptop does not recognize sata hard drive solved Windows 8 does not recognize a previous Mac-oriented external hard drive windows

Many computers out there are not configured to boot from the CDROM. Hide Question All replies Helpful answers by Loner T, Loner T Dec 26, 2016 12:15 PM in response to SuicideJesus666 Level 7 (29,242 points) Safari Dec 26, 2016 12:15 PM in Join the community here, it only takes a minute. patmac replied Mar 18, 2017 at 12:33 AM News from the web #3 poochee replied Mar 17, 2017 at 11:55 PM Happauge Broadway Problems des000 replied Mar 17, 2017 at 11:52