Home > Windows Nt > Windows NT "NTHQ"

Windows NT "NTHQ"

Then, it will ask if you want to create an emergency repair disk(ERD). Install software from other CDs that have worked on this computer before. Top of pageTroubleshooting Using HKEY_LOCAL_MACHINE Problems can often be traced to services, device drivers, or startup control data. The HCL included in the Windows NT Server Resource Kit lists the hardware components that have been tested and have passed compatibility testing with Windows NT version 4.0.

Hard disk space Intel x86-based computers: 110MB for Win NT Workstation and 125MB for Win NT Server. The values are described as follows: ValueMeaningDescription0 BootLoaded by the boot loader (NTLDR or OSLOADER) during the startup sequence.1 System Loaded at Kernel initialization during the load sequence.2 Auto Load Loaded He wants to run a marathon by the time he is 40 only a few more years to train for that one! The specified service is disabled and cannot be started. https://forums.techguy.org/threads/windows-nt-nthq.29064/

ControlSet001 will be used for the Default control set the next time you start the computer. You should use active rather than passive terminators whenever possible. She can be found consulting, teaching, and speaking at conferences, training centers, and private companies.

Has somebody else been using the computer, and could that person have made changes you do not know about? Four Installation Phases NT installation takes place in four phases. So, if you hear anything, let him know. Check your hardware configuration.

The Windows NT Diagnostics Administrative Tool enables you to: •View information about the hardware connected to the computer. •Identify device drivers and services that should be started when you start the computer. To If you have previously printed the output from the Drivers utility (by redirecting the output to a printer or a file), you can compare the previous output with one that you Here, thousands of messages are documented, with the probable cause and recommended solution to each of them. https://books.google.com/books?id=7Psd_gzgq8IC&pg=PA21&lpg=PA21&dq=Windows+NT+%22NTHQ%22&source=bl&ots=EshkCcI6U_&sig=_xWV34gzodZq5lslQU7fH_ouy2g&hl=en&sa=X&ved=0ahUKEwjA48CGnO7RAhXp34MKHSPZC24Q6AEIJTAC You can use Regedit.exe to find the name anywhere in the control set.

After the /U option, you type the filename of the unattended installation file. The HCL includes the following topics: CPU architecture support, which includes single and multiple processor support with CISC and RISC processors. Tech Support Guy is completely free -- paid for by advertisers and donations. This will make a floppy which you must boot from to do the test.

This information can also be printed or saved to disk. https://www.microsoft.com/resources/documentation/windowsnt/4/server/reskit/en-us/resguide/svr_trbl.mspx If this program or functionality has never worked on this computer, compare the setup and configuration on this computer with the same program on another computer to identify differences. Save - Saves the query results to disk. Passive terminators are resistors with the appropriate resistance value for the characteristic impedance of the cable.

Top of pageTroubleshooting Hardware Problems There are three Microsoft products that you can use to help troubleshoot hardware problems: •Hardware Compatibility List (HCL) •Windows NT Hardware Detection Tool (NTHQ) •Windows NT Diagnostics Administrative Thread Status: Not open for further replies. ErrorControl This value entry controls whether an error during the startup of this driver will cause the system to switch to the LastKnownGood control set. If Win NT 3.x is upgraded to Win NT 4.0, the upgrade process preserves existing registry settings, including the following: User and group accounts Network settings and configuration The desktop environment

  1. This disk will be used to boot the computer, so the computer you will check with the NTHQ program will have to be able to boot from a 3.5" floppy drive.
  2. Mouse or other pointing device and Network adapter card(s).
  3. You must decide where to put the NT system partition.
  4. Click here to join today!
  5. Therefore, something must be wrong with accessing data on the later tracks of the CD.
  6. An octet is separated by periods.
  7. Before upgrade, do back-up data first.
  8. As you troubleshoot the problem, try to change only one of these variables at a time.

It also contains subkeys describing which drivers are attached to which hardware devices, as well as the services that are installed on the system. ServiceGroupOrder SubkeyYou can see the order in which Note that IRQ, DMA, and I/O addresses for detected devices are detailed in the Nthq.txt file.Plug and Play (PnP) devices can, with the proper operating system, be automatically configured to work Get another CD of the same version and try to install Windows NT from it. (Perhaps there is a problem with the CD itself.) Windows NT Setup failed on the same The hot seller is currently Windows 2000 Server, which you should go out now and buy.

This book organizes NT's complex GUI interface, dialog boxes, and multitude of DOS-shell commands into an easy-to-use quick reference for anyone who uses or manages an NT system. Unleashing Windows: Windows NT's NTHQ Utility Windows NT 4.0, like many high-end operating systems, is very selective about the hardware requirements used. This feature is useful if you want to find a specific value or string. Most of the examples in this section use the Regedt32.exe.

Consequently, you can produce a system that will boot to either O/S.

Careful record keeping is essential to successful troubleshooting. You can create a DIFF file by running Sysdiff at two different times (before and after). Top of pageUsing Troubleshooting Tools This section provides a brief overview of the troubleshooting tools that are available on the Windows NT Server product CD and the Windows NT Server Resource Although officially replaced by Windows 2000, it is clear that it will be some years before Windows NT disappears from the network mainstream.

This screen shot shows the SYSTEM key and its subkeys.  The most important troubleshooting information in the Registry key HKEY_LOCAL_MACHINE \SYSTEM are the control sets. Identifying Whether It Works in Other Situations Has what you are trying to do ever worked on this computer before? Permissions can be assigned to individual files and folders. Its Start value is 0x4, which means it is disabled.

You can use the message or the information in the event log to find the problem. The most important field is ModuleName, which is the name of the component. But what about the other errors that are in the event log? The window on the right contains value entries.

If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. The next table shows which drivers are in each group. When planning a dual boot system with 95 or 98, be sure to install NT in a different directory than 9X. View Full Document NT Hardware Qualifier (NTHQ) A Windows NT utility which checks the hardware installed on an Intel x86 computer before you begin installing Windows NT.

If you are using a SCSI device, check it termination. The file that caused the error copied fine, but other files on the CD could not be copied. Be sure to check for viruses before installing or upgrading Windows NT on a computer that is already in use. If Windows NT is installed an the system partition, the system partition is also the boot partition. If a hard disk contains stripe sets, volume sets, or fault tolerance volumes,

If you decide to use the Last Known Good control set to start the computer, Windows NT will use ControlSet002. It also contains information about using the Windows NT Debugger. •The Messages database, included in this Resource Kit, is another source of troubleshooting information. For a network administrator, it can become an unmanageable situation if a lot of incompatible computers are involved. Win NT Server requires 16MB of RAM.

The Registry subkey HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Services \LanmanWorkstation DependOnGroup When a subkey has a value for the DependOnGroup value entry, at least one service from the group must be loaded before this Restore the data to the new partition. ˇ@ Back << * > > Next show toc Windows NT Server Resource KitChapter 8 - General TroubleshootingThis chapter identifies tools that are available To run NTHQ 1.When running Windows NT, insert a blank 3.5-inch floppy disk in the drive. 2.Run Makedisk.bat from the \Support\Hqtool directory on the Windows NT Server product CD. 3.Leave the floppy TERM Fall '14 PROFESSOR Click to edit the document details Share this link with a friend: Copied!

Manual Upgrade Win 95 can be manually replaced with Win NT 4.0 by installing Win NT in a separate directory. This type of Win32 service runs in a process by itself. 0x20A Win32 service that can share a process with other Win32 services.Many of the services that have a Type value Ask a homework question - tutors are online Mein KontoSucheMapsYouTubePlayNewsGmailDriveKalenderGoogle+ĂśbersetzerFotosMehrShoppingDocsBooksBloggerKontakteHangoutsNotizenNoch mehr von GoogleAnmeldenAusgeblendete FelderBooksbooks.google.de - Anyone who installs Windows NT, creates a user, or adds a printer is an NT system